The Petzl Reverso belay device is ultra-light and versatile. It is ideal for sport climbing, climbing multi-pitch routes and mountaineering. The Reverso mode allows you to save one or two newcomers.
It is suitable for most rope diameters: single ropes from 8.5 to 10.5 mm, half ropes from 7.1 to 9.2 mm and twin ropes from 6.9 to 9.2 mm.
The special design of the rope guide facilitates the passage of the rope in the device and at the same time protects it against wear.
- normal safety technology with both hands on the rope
- even passage of the rope in the device
- Also suitable for abseiling
- Reverso mode for securing one or two newcomers on a multi-pitch route
- Independent and simultaneous backup of two newcomers in the Reverso mode
- Opening to unlock: allows the progressive output of rope with a simple carabiner when the device is loaded
- The installation on the rope is shown on the belay device (on the inside and outside)
- Control of brake friction by the V-shaped, notched brake grooves
- Compatible with dynamic single ropes from 8.5 to 10.5 mm (11 mm according to the suppleness of the rope possible)
- Compatible with dynamic half ropes from 7.1 to 9.2 mm
- Compatible with dynamic twin ropes from 6.9 to 9.2 mm
- Increased service life thanks to the rounded design of the cable guide, which limits wear on the device
- compact and extremely light, only 57g
- Certification (s): EN 15151-2, UIAA
- Weight: 57g
(Translated with Google Translate)
It is suitable for most rope diameters: single ropes from 8.5 to 10.5 mm, half ropes from 7.1 to 9.2 mm and twin ropes from 6.9 to 9.2 mm.
The special design of the rope guide facilitates the passage of the rope in the device and at the same time protects it against wear.
- normal safety technology with both hands on the rope
- even passage of the rope in the device
- Also suitable for abseiling
- Reverso mode for securing one or two newcomers on a multi-pitch route
- Independent and simultaneous backup of two newcomers in the Reverso mode
- Opening to unlock: allows the progressive output of rope with a simple carabiner when the device is loaded
- The installation on the rope is shown on the belay device (on the inside and outside)
- Control of brake friction by the V-shaped, notched brake grooves
- Compatible with dynamic single ropes from 8.5 to 10.5 mm (11 mm according to the suppleness of the rope possible)
- Compatible with dynamic half ropes from 7.1 to 9.2 mm
- Compatible with dynamic twin ropes from 6.9 to 9.2 mm
- Increased service life thanks to the rounded design of the cable guide, which limits wear on the device
- compact and extremely light, only 57g
- Certification (s): EN 15151-2, UIAA
- Weight: 57g
(Translated with Google Translate)
| SportOkay.com number | 0074-10319 |
|---|---|
| Item number | d017aa00 |
| Brand | Petzl |
| Product type | Belays |
